Selected family......................... : Barracuda 7200.8 Tonka
Selected model.......................... : ST3300831AS
Model by ID............................. : ST3250823A                              

Current utility options are outdated!

Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!

Detection of HDD COM port baud rate..... : 9600


COM transfer baud rate set to 921000

PC COM port baud rate detected : 921000


Test  : Saving LDR from HDD
HDD profile file......... : C:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\SeagateBara\Barracuda 7200.8 Tonka\ST3250823A-3.06-3ND2TBSP\Data\LDR\SgLDR.ldr
Will be stored........... : ROM, App, CERT code, CERT tables, Ovl 0, Stuff, DRV cfg

DRV cfg reading...
DRV cfg reading......................... : Ok

STUFF reading...
Detecting Stuff position...

Terminal : detecting SA bounds...
SA bounds identified
Result.................................. : Ok
Stuff cylinder.......................... : 0x1624A
Vendor Data start....................... : 0x14
PN...................................... : 100386887
STUFF reading........................... : Ok

CERT code reading...
 
Trying to load CERT
Result.................................. : Ok
CERT Rev................................ : .119
CERT code cyl. index.................... : 0x32
CERT code length........................ : 0x3A8
 
Block 0, 0x16242 : 0x0 : 0x0 (0x2C9)
Detecting next track.................... : Ok
Block 1, 0x16242 : 0x1 : 0x0 (0xDF)
CERT code reading....................... : Ok

CERT tables reading...
Detecting CERT tables position...
Detecting CERT tables position.......... : 0x16244 : 0x0 : 0xDF (0x15)
CERT tables reading..................... : Ok
 
Detecting ATA Overlay position...

Terminal : detecting SA bounds...
SA bounds identified
ATA Overlay (0)......................... : 0x16246 : 0x0 : 0x0 (0x78)

ATA Overlay (0) reading...
ATA Overlay (0) reading................. : Ok

App code reading...

Initializing Safe Mode...

Switching HDD power supply OFF

Switching HDD power supply ON
Switching into Safe mode................ : Ok

HDD SpinUp.............................. : Ok

Reading boot SA elements...
Result.................................. : Ok
Detecting App code parameters...
Detecting App code parameters........... : Ok
App cylinder............................ : 0x161F4
App length.............................. : 0x1A0
App buffer.............................. : 0x60

Terminal : detecting SA bounds...
Detection of SA bounds by MUX
SA bounds identified
App code reading........................ : Ok

Initializing Safe Mode...

Switching HDD power supply OFF

Switching HDD power supply ON
Switching into Safe mode................ : Ok
ROM: TONKA, M-27 
OK
OK
OK
OK
OK
Reading ROM............................. : Ok

Result.................................. : Ok

